![](/images/new-backgrounds/1200564/200564115x1.webp)
3Press Menu until “Fax Feature” appears on the top line of the display. The first available menu item, “DelayFax,” displays on the bottom line.
4Press Enter.
5Enter the number of the remote machine using the number keypad.
You can use
6Press Enter to confirm the number on the display. The display asks you to enter another fax number to send the document.
NOTE: The “Another No.” prompt does not appear if you have added numbers for another broadcasting or delayed fax job. You must wait until the job is completed.
7 To enter more fax numbers, press 1 to select “Yes” and repeat steps 4
and 5. You can add up to 10 destinations. | 3 | |
Note that you cannot use group dial numbers for another fax number. | ||
|
8When you finish entering fax numbers, press 2 to select “No” at a “Another No.” prompt.
The display asks you to enter a name.
9To assign a name to the transmission, enter the name. If not, skip this step.
For details on how to enter the name using the number keypad, see page 1.14.
10Press Enter.
The display shows the current time and asks you to enter the starting time when the fax is to be sent.
11Enter the time using the number keypad.
To select “AM” or “PM” for or
button or any number button.
If you set a time earlier than the current time, the document will be sent at that time on the following day.
12Press Enter when the start time displays correctly.
The document is scanned into the memory before transmission. The display shows the memory capacity and the number of pages being stored in the memory.
The machine returns to Standby mode. The display reminds you that you are in Standby mode and that a delayed fax is set.
NOTE: If you want to cancel the delayed transmission, see “Canceling a Scheduled Fax” on page 3.6.