8
Getting Started
Battery installation & charging

After installation, place the handset in the telephone base and allow the bat-

tery to charge for sixteen hours before use. You can keep battery charged by

returning the handset to the telephone base after each use. When the battery

power is fully depleted, a full recharge takes about sixteen hours.

Place handset in telephone base
to charge for at least sixteen hours
before first use.
Press tab and slide
cover away from the
battery compartment.
Insert supplied battery as indi-
cated. Insert the top edge (con-
tacts and tab) first, then push
down on the lower portion.
Caution: Use only supplied
rechargeable battery or AT&T
replacement battery Model 103
(SKU 00249).
Low battery indicator
Return handset to telephone base to
recharge when this symbol flashes.
(Handset will beep when battery is low.)
FLASH CANCEL
Replace battery compartment
cover.
12:00AM
REDIAL CALLER ID
HANDSET 2
Low Battery
NOTE: When fully charged, the
battery in the handset can pro-
vide 5 hours of talk time or 3 days of
standby time (when idle and away from
the telephone base).
NOTE: For installation of the
spare battery into the spare bat-
tery compartment on the telephone
base, please see page 68.
1.
2.