12:00AM |
|
Phone | 0:41 |
HOLD | MUTE |
x 3
Intercom
Intercom
Global page
BASE
HANDSET 1
Telephone Operation
Basic handset operation
Hold
Press the softkey HOLD to place a call on hold. Press 
/PHONE/FLASH or 
/SPEAKER to resume the call. Placing a call on hold cancels the MUTE feature.
When a call is put on hold, the status light on the top left corner of the cordless handsets will flash and the IN USE light on the telephone base will also flash.
NOTE: Any digits currently in the display will be dialed out when HOLD is released.
Caution: If the call is not resumed in 15 minutes, the originating handset will ring and the the display will show CALL ON HOLD RING BACK. If the RING BACK is not answered in 30 seconds, the call will be disconnected.
You can send an external call to the telephone base or to another handset if additional handsets are registered for use with the system.
•Press the softkey HOLD to put the call on hold.
•Press the CENTER NavKey 
to enter the Main Menu.
•Press the DOWN NavKey 
three times to reach the Intercom listing.
•Press the CENTER NavKey 
to enter the Intercom menu.
•Select from the list of destinations: Global page, BASE, or one of the registered handsets. Press the CENTER NavKey 
to confirm selection.
Caution: If the base or handset does not answer the intercom call in one minute, the intercom ring stops and the call remains on hold until it times out in fifteen minutes.
24
