Getting Started

Wall mounting

The telephone base can be installed on any standard telephone outlet as shown below. Choose a central location within the home, away from any elec- tronic equipment such as personal computers, computer routers, television sets or microwave ovens. Avoid excessive heat, cold, dust or moisture.

1)Connect telephone line cord and AC power cord to telephone jacks and wall jacks, as shown on page 7.

2)Install wall mount bracket onto set.

(a) First put the two front wall-mount bracket tabs into the front notches on the bottom of the telephone base.

(b) Squeeze the rear tabs of the wall mount bracket when inserting them into the rear notches on the bottom of the telephone base.

3)Position the wall- mount bracket over the wall outlet mounting pegs, then press and slide the wall-mount bracket down firmly so it is held securely on the outlet mounting pegs.

b

b

a

a

Plug the power adapter into an electrical outlet not controlled by a switch.

Plug telephone line cord into telephone wall jack.

9

Page 14
Image 14
AT&T EP5995 user manual Wall mounting