25
Telephone Operation
CANCEL
SPEAKER
Basic base operation
Making, answering and ending calls
To make a call, press /SPEAKER, then dial a
number. Press /SPEAKER again to hang up.
To answer an incoming call, press /SPEAKER.
To preview numbers before dialing, enter num-
bers first, then press /SPEAKER to dial. Press
CANCEL anytime to correct any wrong numbers.
Pressing HOLD/PAUSE generates a two-second delay.
Last number redial
Press REDIAL to display a list of ten numbers
recently dialed. Use the ^DIR or VCID to select a
number, then press /SPEAKER to dial (see pages
52-53 to delete the entry, or save it to your direc-
tory).
In use light
When a cordless handset, the telephone base, or
another telephone connected to the same tele-
phone line is in use, the IN USE light will be on.
When the handset or the telephone base is on
hold, the IN USE light will flash.
New voicemail light
When there is new voicemail at your local tele-
phone company which have not been reviewed,
the NEW VOICE MAIL light on the telephone
base will flash and the status light on the top left
corner of the handset will also flash.
In the event the indication remains after you
have listened to your local telephone company’s
voicemail messages, you can remove the indication
according to the instruction on pages 21-22.
REDIAL
IN USE
NEW
VOICE MAIL