Press INTERCOM on the telephone base.
OR
x 3
Intercom
Telephone Operation
Intercom calls
Intercom calls
The intercom feature allows conversation between the handset and the telephone base, or between handsets if additional handsets are regis- tered for use with the system.
From the idle mode, press INTERCOM on the tele- phone base to initiate an intercom call.
From the idle mode, press the CENTER NavKey 
to enter the main menu. Press the DOWN NavKey 
three times to reach the Intercom menu. Press the CENTER NavKey 
to confirm selection.
Press the UP or DOWN NavKey 
or 
to scroll down to select Global page to page all handsets, or select BASE or one of the registered handsets. Press the CENTER NavKey 
(or SELECT at the telephone base) to page the selected handsets or the telephone base.
On the selected handset or the telephone base, press 
/PHONE/FLASH, 
/SPEAKER or INTERCOM to answer an intercom page. The telephone base will ring until 
/SPEAKER is pressed or until the page is cancelled by pressing CANCEL.
When your intercom call is finished, press 
/OFF/CANCEL on the handset (or 
/SPEAKER or
INTERCOM at the telephone base) to end the call.
Handling incoming calls
During an intercom conversation, the telephone will beep if there is an incoming external call.
•On the handset, press 
/OFF/CANCEL to termi-
nate the intercom call. The handset will ring normally. Press 
/PHONE/FLASH, or 
/SPEAKER to answer the incoming call.
•At the telephone base, press 
/SPEAKER or INTERCOM to terminate the intercom call. The telephone base will ring normally. Press 
/ SPEAKER again to answer the incoming call.
28
