13
Telephone Setup
Start recording the new ringer after the tone.
When finished recording, press the softkey STOP.
Press the softkey PLAY to listen to the recorded
ringer. Then press the softkey SAVE to enter the
name of this recording using the table on page 30.
Enter up to ten alphanumeric characters for the
name of this recording (See table on page 30).
Press the softkey SAVE to save this ringer. The
recording with the programmed name will then be
added to the list of ringer melodies.
More than one record ringer can be recorded
as long as there is recording time remaining. The
total recording time can be extended if some of
the preset musical ringers are deleted.
Keypad tone
The handset is preset to beep with the pressing
of each key. The keypad tones can be turned on
or off in this menu.
Press the UP or DOWN NavKey or to select
whether you want the keypad tone to be on or
off. Then press the softkey SET or the CENTER
NavKey to confirm.
On
Keypad Tone
Off
SET
NOTE: The microphone
used when recording a ringer
is located at the bottom of the
handset. If recording a tune,
place the microphone about
twelve inches from the music
source. If recording a mes-
sage, speak clearly from about
twelve inches.