Microsoft ES4625, ES4649 manual Configuring the Switch

3 Configuring the Switch

Web – Click Security, SSH, Settings. Enable SSH and adjust the authentication parameters as required, then click Apply. Note that you must first generate the host key pair on the SSH Host-Key Settings page before you can enable the SSH server.

Figure 3-38 SSH Server Settings

CLI – This example enables SSH, sets the authentication parameters, and displays the current configuration. It shows that the administrator has made a connection via SHH, and then disables this connection.

Console(config)#ip		ssh server		4-37
Console(config)#ip		ssh timeout 100		4-37
Console(config)#ip		ssh authentication-retries 5		4-38
Console(config)#ip		ssh server-key size 512		4-38
Console(config)#end
Console#show ip ssh				4-41
SSH Enabled - version 2.0
Negotiation timeout: 120 secs; Authentication retries: 3
Server key size: 768 bits
Console#show ssh				4-41
Information of secure shell
Session Username Version Encrypt method Negotiation state
------- -------- ------- -------------- -----------------
0	admin	2.0	cipher-3des session-started
Console#disconnect		0		4-19
Console#

3-64