Microsoft ES4625, ES4649 manual Flash/File Commands, Command Line Interface

4 Command Line Interface

Example

Console(config)#jumbo frame

Console(config)#

Flash/File Commands

These commands are used to manage the system code or configuration files.

Table 4-25 Flash/File Commands

Command	Function	Mode	Page
copy	Copies a code image or a switch configuration to or from flash	PE	4-64
	memory or a TFTP server
delete	Deletes a file or code image	PE	4-67
dir	Displays a list of files in flash memory	PE	4-67
whichboot	Displays the files booted	PE	4-68
boot system	Specifies the file or image used to start up the system	GC	4-69

copy

This command moves (upload/download) a code image or configuration file between the switch’s flash memory and a TFTP server. When you save the system code or configuration settings to a file on a TFTP server, that file can later be downloaded to the switch to restore system operation. The success of the file transfer depends on the accessibility of the TFTP server and the quality of the network connection.

Syntax

copy file {file running-config startup-config tftp unit} copy running-config {file startup-config tftp}

copy startup-config {file running-config tftp}

copy tftp {file running-config startup-config https-certificate public-key}

copy unit file

•file - Keyword that allows you to copy to/from a file.

•running-config - Keyword that allows you to copy to/from the current running configuration.

•startup-config - The configuration used for system initialization.

•tftp - Keyword that allows you to copy to/from a TFTP server.

•https-certificate - Keyword that allows you to copy the HTTPS secure site certificate.

•public-key - Keyword that allows you to copy a SSH key from a TFTP server. (See “Secure Shell Commands” on page 4-34.)

•unit - Keyword that allows you to copy to/from a specific unit in the stack.

4-64