Microsoft ES4625, ES4649 manual Following example shows how to download a configuration file

4 Command Line Interface

The following example shows how to copy the running configuration to a startup file.

Console#copy running-config file destination file name: startup Write to FLASH Programming. \Write to FLASH finish.

Success.

Console#

The following example shows how to download a configuration file:

Console#copy tftp startup-config

TFTP server ip address: 10.1.0.99

Source configuration file name: startup.01

Startup configuration file name [startup]:

Write to FLASH Programming.

\Write to FLASH finish. Success.

Console#

This example shows how to copy a secure-site certificate from an TFTP server. It then reboots the switch to activate the certificate:

Console#copy tftp https-certificate

TFTP server ip address: 10.1.0.19

Source certificate file name: SS-certificate

Source private file name: SS-private

Private password: ********

Success.

Console#reload

System will be restarted, continue <y/n>? y

This example shows how to copy a public-key used by SSH from an TFTP server. Note that public key authentication via SSH is only supported for users configured locally on the switch.

Console#copy tftp public-key

TFTP server IP address: 192.168.1.19

Choose public key type:

1.RSA: 2. DSA: <1-2>: 1 Source file name: steve.pub Username: steve

TFTP Download Success.

Write to FLASH Programming. Success.

Console#

4-66