Microsoft ES4625, ES4649 manual Policy Rule Settings Class Settings, Policy Options

3 Configuring the Switch

Policy Rule Settings

- Class Settings -

•Class Name – Name of class map.

•Action – Shows the service provided to ingress traffic by setting a CoS, DSCP, or IP Precedence value in a matching packet (as specified in Match Class Settings on page 3-162).

•Meter – The maximum throughput and burst rate.

-Rate (kbps) – Rate in kilobits per second.

-Burst (byte) – Burst in bytes.

•Exceed Action – Specifies whether the traffic that exceeds the specified rate will be dropped or the DSCP service level will be reduced.

•Remove Class – Deletes a class.

- Policy Options -

•Class Name – Name of class map.

•Action – Configures the service provided to ingress traffic by setting a CoS, DSCP, or IP Precedence value in a matching packet (as specified in Match Class Settings on page 3-162). (Range - CoS: 0-7, DSCP: 0-63, IP Precedence: 0-7)

•Meter – Check this to define the maximum throughput, burst rate, and the action that results from a policy violation.

-Rate (kbps) – Rate in kilobits per second. (Range: 1-100000 kbps or maximum port speed, whichever is lower)

-Burst (byte) – Burst in bytes. (Range: 64-1522)

•Exceed – Specifies whether the traffic that exceeds the specified rate or burst will be dropped or the DSCP service level will be reduced.

-Set – Decreases DSCP priority for out of conformance traffic. (Range: 0-63).

-Drop – Drops out of conformance traffic.

•Add – Adds the specified criteria to the policy map.

3-166