Microsoft ES4649, ES4625 manual Consoleconfig#interface ethernet 1/2

User Authentication 3

CLI – This example sets the 802.1X parameters on port 2. For a description of the additional fields displayed in this example, see “show dot1x” on page 4-85.

Console(config)#interface ethernet 1/2				4-143
Console(config-if)#dot1x port-control auto				4-81
Console(config-if)#dot1x re-authentication				4-83
Console(config-if)#dot1x max-req 5				4-81
Console(config-if)#dot1x timeout quiet-period 40				4-83
Console(config-if)#dot1x timeout re-authperiod 5				4-84
Console(config-if)#dot1x timeout tx-period 40				4-84
Console(config-if)#end
Console#show dot1x				4-85
Global 802.1X Parameters
system-auth-control: enable
802.1X Port Summary
Port Name	Status	Operation Mode	Mode	Authorized
1/1	disabled	Single-Host	ForceAuthorized	yes
1/2	enabled	Single-Host	Auto	yes
.
.
.
1/25	disabled	Single-Host	ForceAuthorized	n/a
1/26	disabled	Single-Host	ForceAuthorized	n/a
802.1X Port Details
802.1X is disabled on		port 1/1
802.1X is enabled on port 1/2
reauth-enabled:		Disable
reauth-period:		3600
quiet-period:		60
tx-period:		30
supplicant-timeout:		30
server-timeout:		10
reauth-max:		2
max-req:		2
Status		Authorized
Operation mode		Single-Host
Max count		5
Port-control		Auto
Supplicant		00-e0-29-94-34-65
Current Identifier		7
Authenticator State Machine
State		Authenticated
Reauth Count		0
Backend State Machine
State		Idle
Request Count		0
Identifier(Server)		6
Reauthentication State Machine
State		Initialize
.
.
.
.		port 1/26
802.1X is disabled on

Console#

3-71