Microsoft ES4649, ES4625 manual Policy-map

Quality of Service Commands 4

This example creates a class map call “rd_class#2,” and sets it to match packets marked for IP Precedence service value 5:

Console(config)#class-map rd_class#2 match-any

Console(config-cmap)#match ip precedence 5

Console(config-cmap)#exit

Console(config)#access-list ip mask-precedence in

Console(config-ip-mask-acl)#mask any any precedence

Console(config-ip-mask-acl)#

This example creates a class map call “rd_class#3,” and sets it to match packets marked for VLAN 1:

Console(config)#class-map rd_class#3 match-any

Console(config-cmap)#match vlan 1

Console(config-cmap)#exit

Console(config)#access-list mac mask-precedence in

Console(config-ip-mask-acl)#mask any any vid 1

Console(config-ip-mask-acl)#

policy-map

This command creates a policy map that can be attached to multiple interfaces, and enters Policy Map configuration mode. Use the no form to delete a policy map and return to Global configuration mode.

Syntax

[no] policy-map policy-map-name

policy-map-name- Name of the policy map. (Range: 1-32 characters)

Default Setting

None

Command Mode

Global Configuration

Command Usage

•Use the policy-map command to specify the name of the policy map, and then use the class command to configure policies for traffic that matches criteria defined in a class map.

•A policy map can contain multiple class statements that can be applied to the same interface with the service-policy command (page 4-224).

•You must create a Class Map (page 4-221)before assigning it to a Policy Map.

Example

This example creates a policy called “rd_policy,” uses the class command to specify the previously defined “rd_class,” uses the set command to classify the service that incoming packets will receive, and then uses the police command to limit the

4-221