Existing Construction Installation
D
Use the motor housing as a template to mark position.
|
|
| ” |
7. |
| .75 | |
| 7 |
| |
25 | ” |
| |
|
|
| |
Cut out an opening for the housing.
Existing Fan
Remove the existing fan and check to make sure the opening is large enough to accommodate the new motor housing (7.25” x 7.75”).
B2
B1 |
D |
Loosen screw securing motor.
B3
Remove the motor/blower from the housing. | Remove packing material. |
8
