Kodak ESP 9 Configuring basic wireless WiFi settings, Network Settings options, WiFi Setup Wizard

Models: ESP 9

1 141
Download 141 pages 3.04 Kb
Page 35
Image 35
Configuring basic wireless (WiFi) settings

Chapter 3

Configuring basic wireless (WiFi) settings

Note: You will need to know the network name (SSID) of the WiFi network, and its security string to connect your printer to the network successfully.

Caution: If there is an Ethernet cable plugged in to the Ethernet port on the back of the printer, unplug it before starting this task.

1From the control panel, press Menu.

2 Press until Network Settings is selected, and then press OK.

3If you see the setting displaying the message: Turn WiFi Radio On, press OK now.

4 As needed, press , , or to view or configure an item, and then press OK.

Network Settings options

If the printer has not been configured to connect to the WiFi network or the printer WiFi radio is turned off, the LCD display displays the options below:

Menu Options

Settings / Action

 

 

WiFi Setup Wizard

Press OK to start the Wizard.

 

 

Turn WiFi Radio On / Off

Press OK to toggle between the WiFi radio on or off

 

states.

 

 

View Network Configuration

Press OK to view the configuration on the LCD display.

 

 

Print Network Configuration

Press OK to print the network configuration.

 

 

Manual IP Address

Press OK to display the Manual IP Address menu.

 

 

WiFi Setup Wizard

Review the procedures below and use the one that suits your network setup.

Connecting to a listed network

1Complete Steps 1 and 2 of “Configuring basic wireless (WiFi) settings” on page 27.

2WiFi Setup Wizard is the first option; press OK to select it.

Note: The WiFi radio is turned on automatically when WiFi Setup Wizard is selected.

3The printer searches for available WiFi networks within range; then displays the list in alphabetical order on the LCD. The illustration below shows an example list. The row containing each <Network name> listed also shows the strength of the signal (shown below as xx%) as a percentage between 0 and 100, where 100 is the highest possible strength.

If more WiFi networks are within range than can be shown on the LCD, the display includes the Network Settings options (page down) symbol and/or the WiFi Setup Wizard (page up) symbol on the LCD.

Kodak ESP 9 Printer User Guide

27

Page 35
Image 35
Kodak ESP 9 manual Configuring basic wireless WiFi settings, Network Settings options, WiFi Setup Wizard