Kodak ESP 9 Setting Up Your Printer, Selecting a printer location, Configuring printer settings

Models: ESP 9

1 141
Download 141 pages 3.04 Kb
Page 31
Image 31
Setting Up Your Printer

3

Setting Up Your Printer

Use this chapter to set up and start using your Kodak All-in-One printer.

Selecting a printer location

Place your printer on a clean, flat surface in a dry, well-ventilated location, away from direct sunlight. Avoid areas with high levels of dust and debris. Do not expose the printer and paper to ventilation ducts, open doors, or high traffic, as airborne particles can affect picture quality.

Allow enough space on all sides of the printer to comfortably connect and disconnect cables, change ink cartridges, as well as remove and load paper.

To ensure getting good signals from your networked computer(s), minimize obstacles between the network router and the printer (and other wireless devices, such as Bluetooth–enabled camera phones, etc.). The printer will function best with as clear a “line of sight” as possible between it and the router.

In addition, keep the printer away from microwaves, and away from 2.4 GHz wireless telephone handsets.

Configuring printer settings

Printer settings can be adjusted in two ways: via the control panel or the Home Center software that comes with your printer (see Home Center Help for more details).

Configuring basic settings

1From the control panel, press Menu.

2

Press

until Printer Settings is selected, and then press OK.

3

Press

until the parameter you want to configure is selected, and then press OK. To

 

review the available options and settings, see “Printer settings options” on page 24.

4

Press

or

to configure the Date and Time, Tagged Image Printing, Control Panel

 

Settings, Language, Country/Region, or Reset All Settings.

Kodak ESP 9 Printer User Guide

23

Page 31
Image 31
Kodak ESP 9 manual Setting Up Your Printer, Selecting a printer location, Configuring printer settings