Kodak ESP 9 manual Unsupported authentication or encryption type, Invalid WEP Key, Probable Cause

Models: ESP 9

1 141
Download 141 pages 3.04 Kb
Page 112
Image 112
Unsupported authentication or encryption type

Troubleshooting

Probable Cause 5

The wireless settings on the printer do not match the wireless settings of your access point.

Corrective Action

Print a network configuration page to compare the wireless settings of the printer with the wireless settings for your access point. Change either the device or access point settings so that both the printer and the access point have matching wireless settings.

Probable Cause 6

You entered the wrong mode (ad hoc or infrastructure) or security type.

Corrective Action

Enter the correct mode or security type. Print a network configuration page to compare the wireless settings of the printer with the wireless settings for your access point. Change either the device or access point settings so that both the printer and the access point have matching wireless settings.

Probable Cause 7

MAC filtering is enabled on your access point.

Corrective Action

Keep MAC filtering enabled, but change the settings to allow the access point to communicate with the printer.

Unsupported authentication or encryption type

Probable Cause

Your network is configured with an authentication protocol not supported by the Kodak All-in-One printer.

Corrective Action

Open the Embedded Web Server of your access point and change the security settings. Use one of the supported protocol types.

Note: Types not supported include WPS, WPA2-Enterprise, LEAP, PEAP, EAP- MD5, EAP-TLS, and EAP-TTLS.

Invalid WEP Key

Probable Cause 1

An invalid WEP key was entered.

104

Kodak ESP 9 Printer User Guide

Page 112
Image 112
Kodak ESP 9 manual Unsupported authentication or encryption type, Invalid WEP Key, Probable Cause, Corrective Action