Kodak ESP 9 manual Regulatory Compliance, Environment, FCC Compliance and Advisory

Models: ESP 9

1 141
Download 141 pages 3.04 Kb
Page 122
Image 122
Environment

Product and Safety Specifications

Warning: Do not place your printer on an unstable cart, stand, bracket, or table; this risks damaging the equipment and injuring people.

Environment

Caution: Excessive dust levels may damage internal parts.

Caution: Unplug the equipment from the electrical outlet before cleaning.

Caution: Dropping your printer may damage the housing and result in extensive damage that will require replacement or repair by a qualified technician to restore normal operation.

Warning: Do not expose this product to liquid, moisture, or extreme temperatures. Kodak alternating current (AC) adapters are intended for indoor use only. The use of controls, adjustments, or procedures other than those specified herein may result in exposure to shock and/or electrical or mechanical hazards.

Caution: Adjust only those controls covered in the user guide or setup instructions.

For more information, go to www.Kodak.com/go/MSDS.

Regulatory Compliance

FCC Compliance and Advisory

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.

This equipment generates, uses, and can radiate radio frequency energy and, if not installed or used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.

114

Kodak ESP 9 Printer User Guide

Page 122
Image 122
Kodak ESP 9 manual Regulatory Compliance, Environment, FCC Compliance and Advisory