Kodak ESP 9 manual Network troubleshooting, Scanned image blank, Wired network troubleshooting

Models: ESP 9

1 141
Download 141 pages 3.04 Kb
Page 105
Image 105
Probable cause 5

Chapter 10

Probable cause 5

The memory card you are scanning to does not have enough free space to save the scanned photo.

Corrective action

Remove some files from the memory card to free up some space.

Scanned image blank

Probable Cause

Your original is not placed correctly on the scanner glass.

Corrective Action

Place your original face down in the proper corner of the scanner glass.

Network troubleshooting

Wired network troubleshooting

Computer unable to detect the All-in-One printer

Probable Cause 1

Cables are not connected properly.

Corrective Action

Check the following cables to ensure they are properly connected.

Cables between the hub or router and your computer

Cables between the All-in-One printer and the hub or router

Cables to and from your modem or printer Internet connection (if applicable)

Probable Cause 2

Your Local Area Network card (LAN card) is not set up properly.

Corrective Action

Verify the setup of your LAN card.

To check your LAN card (Windows)

1Open the Control Panel.

2Double-click System.

3In the System Properties dialog box, click the Hardware tab.

4Click Device Manager.

Kodak ESP 9 Printer User Guide

97

Page 105
Image 105
Kodak ESP 9 Network troubleshooting, Scanned image blank, Wired network troubleshooting, Probable cause, Corrective action