Kodak ESP 9 manual Monitoring and adjusting the printers performance

Models: ESP 9

1 141
Download 141 pages 3.04 Kb
Page 83
Image 83
Monitoring and adjusting the printer's performance

Chapter 9

1Unplug the printer and raise the lid.

2Clean the underside with a soft cloth or sponge, slightly moistened with a mild soap and warm water.

3Wipe the underside gently to loosen debris. Do not scrub.

4Dry the underside with a chamois or soft cloth.

5If further cleaning is needed, repeat the previous steps using isopropyl (rubbing) alcohol, and wipe the underside thoroughly with a damp cloth to remove any residual alcohol.

6When finished cleaning, plug in the printer.

Monitoring and adjusting the printer's performance

From the control panel, you can perform many tasks to keep this printer in good working order. For example, you can check the status of the printer’s inkjet nozzle to ensure high- quality prints. Kodak recommends that you run a nozzle check if you are experiencing changes in image quality. You can also use the Printhead Alignment function if you see degradation in print quality.

1Make sure that there are 510 sheets of plain paper loaded in the bottom paper tray.

2Press Menu to display the main menu.

3

Press

until Maintenance is selected.

4

As needed, press

until the desired option is selected.

5Press OK.

6Follow the prompts on the LCD display to initiate or cancel the task. These available maintenance options are shown in the table below:

Kodak ESP 9 Printer User Guide

75

Page 83
Image 83
Kodak ESP 9 manual Monitoring and adjusting the printers performance, until the desired option is selected