Chapter 3
5Enter the security information required using the LCD display keyboard.
• Press , , or to select a key. Select <BKSP to erase any incorrect characters. Then select DONE and press OK.
6After the confirmation message appears on the LCD, press OK to display the Network Settings menu.
Setting up an IP address
1From the Network Settings menu, select Manual IP Address and press OK.
2Select one of the options displayed:
•Dynamic (DHCP)
•Automatic (Private)
•Manual (Static)
Then press OK to continue.
3Depending on the IP address type specified, you may be prompted to enter an IP address, a Subnet Mask, a Gateway Address; and a DNS Server address. Press OK after making each entry. See your network provider for more information.
Viewing Network Configuration
When you select this option, the printer displays the configuration settings for both Ethernet and WiFi networks on the LCD.
Printing Network Configuration
When you select this option, the printer prints current network configuration settings. Settings with no values will be displayed as zeros.
Setting up the fax
Your Kodak ESP 9
For more information about sending and receiving faxes using this
.
Note: If your home or office setup is not described in this section, set up the
Warning: Use only the phone cord supplied in the
Kodak ESP 9 Printer User Guide | 29 |