Kodak ESP 9 Print spotted Print too dark, Probable Cause, Corrective Action, Troubleshooting

Models: ESP 9

1 141
Download 141 pages 3.04 Kb
Page 102
Image 102
More than one type or size of paper is loaded.
Kodak ESP 9 Printer User Guide
Edit the picture on your computer.
Try retaking the picture with the flash on, or move within the flash range of the camera. Refer to your camera user’s guide for details.
Adjust the exposure compensation on your camera, and try taking the picture again. Refer to your camera user’s guide for details.
Edit the picture using Kodak Home Center (Windows only) or other image editing software.
Make sure the printer is not placed in direct sunlight or is not operating in a high- temperature environment.
Print too light
.
Caution: For best results, use Kodak paper and ink cartridges for your Kodak All-in-One printer.
Make sure the paper is loaded with the print side face down. Reload it if necessary.
Try taking the picture again with the flash off. Refer to your camera user’s guide for details.
Adjust the exposure compensation on your camera and try taking the picture again. Refer to your camera user’s guide for details.
Probable Cause Paper may be dirty.
Corrective Action
Use a dry, lint-free cloth to wipe clean. For excessive dirt or debris, thoroughly clean the paper tray, and load new paper.
Note: When you are not using the printer, keep paper tray covers closed to keep dust and debris from collecting on the paper or inside the printer.

Troubleshooting

Probable Cause 2

More than one type or size of paper is loaded.

Corrective Action

Load only one type or size of paper at a time.

Print spotted

Print too dark

94

Page 102
Image 102
Kodak ESP 9 Print spotted Print too dark, Probable Cause, More than one type or size of paper is loaded, Corrective Action