Kodak ESP 9 manual Loading plain paper

Models: ESP 9

1 141
Download 141 pages 3.04 Kb
Page 49
Image 49
Loading plain paper

Chapter 4

Loading plain paper

Note: Review “Things to keep in mind” above.

Caution: The automatic document feeder (ADF) on the ESP 9 only accepts plain paper.

1Pull the bottom paper tray toward you

Note: To load media that is more than A4 size, such as 4X12 inch panoramic photo paper or Legal plain paper, you must first extend the lower paper tray to its full length. To do so:

aRemove all paper from the tray, as needed.

bPress and hold the paper tray extension-release, located on the inside of the front of the lower paper tray.

cPull the tray extension toward you gently until it stops moving easily. DO NOT pull the extension far enough to disengage from the paper tray.

dLet go of the tray release, and then load the paper in the tray.

Tip: To return the lower paper tray to its default size, press and hold the extension- release and push the tray until the extension stops moving, and then let go.

2As needed, squeeze and slide the paper-width guide on the tray to the left so that it does not block the paper from laying flat.

3Insert the media into the paper tray, with its near edge against the paper stop, with the print side down.

4As needed, squeeze and slide the paper-width guide to align it to the left edge of the media.

5Lower the paper output tray.

6Gently push the tray forward in till it is aligned to the edge of the paper output tray.

Kodak ESP 9 Printer User Guide

41

Page 49
Image 49
Kodak ESP 9 manual Loading plain paper