Reebok Fitness RBEL9906.1 Follow your progress with the display, HOW to Create a Custom Program

4Follow your progress with the display.

During the program, the display will show the pro- gram profile, the time remaining in the program, and the distance you have pedaled.

To view the profile, your pedaling pace, and the distance you have pedaled, press the Display but- ton. Note: The words SPEED UP or SLOW DOWN may appear in the display to prompt you to keep your pedaling pace near the target pace setting for the current segment.

To view the time remaining in the program and the distance pedaled, press the Display button. Press the Display button again to view the time remain- ing and the approximate number of calories burned.

To view the time remaining, distance pedaled, ramp incline, number of calories burned, and ped- aling pace, press the Display button again. Note: An upward- or downward-pointing arrow may appear in the display to prompt you to keep your pedaling pace near the target pace setting for the current segment.

To view the first display again, press the Display button again.

5Measure your heart rate if desired. See step 5 on page 15.

6Turn on the fan if desired. See step 6 on page 15.

7 When you are finished exercising, the console will turn off automatically.

See step 7 on page 15.

HOW TO CREATE A CUSTOM PROGRAM

1Turn on the console. See step 1 on page 14.

2Select a custom program.

To select a custom program, press the Custom Programs button once or twice. When you select a custom program, the name of the program and the settings for the program will appear in the dis- play for a few seconds.

3program the desired settings.

Each custom program is divided into 30 one- minute segments. You can program one resis- tance level and one target pace setting for each segment.

To program a resistance level for the first seg- ment, simply adjust the resistance of the pedals by pressing the OneTouch Resistance buttons. To program a target pace for the first segment, sim- ply pedal at the desired pace.

At the end of the first segment, the program will store the current resistance level and your current pace in memory. Program a resistance level and a target pace for the second segment as described above.

Continue exercising for up to forty minutes. Stop pedaling when you are finished with your work- out. The program you created will then be stored in memory. Note: If your workout is less than thirty minutes long, any remaining segments in the pro-

gram will be stored with the last resistance level and target pace setting you programmed.Begin pedaling to start the program, and

When the program is finished, the console

4will turn off automatically. See step 7 on page 15.

17