10.Attach the Left Link Arm (30) to the Left Pedal Arm (32) with an M8 x 15mm Button Screw (106), an M8.5 x 16mm x 1.5mm Washer (103), and an Axle Cover (66).

Attach the Left Link Arm (30) to the left Upper Body Leg (24) with an M8 x 25mm Button Screw (110), two M8.5 x 16mm x 1.5mm Washers (103), two Axle Covers (66), a Link Arm Spacer (74), and an M8 x 15mm Button Screw (106) as shown.

Attach the Right Link Arm (31) in the same way.

10

 

 

 

 

24

 

 

 

 

 

31

 

 

 

106

66

74

103

66

 

103

 

 

 

 

 

110

 

 

 

 

 

30

 

 

 

106

66

 

 

103

 

 

 

32

11.Plug the power cord (not shown) into the power socket (not shown) at the rear of the elliptical exer- ciser.

Make sure that all parts of the elliptical exerciser are properly tightened. Note: Some hardware may be left over after assembly is completed. To protect the floor or carpet from damage, place a mat under the elliptical exerciser.

10

Page 10
Image 10
Reebok Fitness RBEL9906.1 manual Attach the Right Link Arm 31 in the same way