weekly, but possibly sooner if needed, to maintain lubrication. Once oil has been put in the cups, close them by turning clockwise.
WARNING
To prevent product contamination, only use USDA authorized oil. Note:
USDA authorized Berkel oil is available in 2 ounce
TROUBLESHOOTING
ELECTRICAL FAILURE
1.Is the pilot light illuminated?
•Is the power cord completely plugged into the wall outlet?
•Check the power cord for cuts or breaks.
•Are you getting electricity from the wall outlet? Check by plugging in another piece of equipment with the same electrical requirements. Also, check the circuit breaker or fuse.
2.Is the master power switch in the “ON” position?
3.Have you lifted the operating lever as far as possible?
BREAD NOT CUTTING PROPERLY
1.Is the bread rack clear of all foreign material?
2.Are the blades dull or broken? If so, have the blades replaced by your local Designated Berkel Service Location.
3.Does it appear as though the blade rack assembly is falling too fast or slow for the product you are slicing? If so, contact your nearest local Designated Berkel Service Location.
MOTOR RUNS BUT NO BLADE MOVEMENT
1.Broken drive belt. Have the drive belt replaced or adjusted by your local Designated Berkel Service Location.
If the correction of any of the above conditions does not result in a functional bread slicer, call your Designated Berkel Service Location.
REPAIR PARTS/REPAIR SERVICE
Please contact your Designated Berkel Service Location for any repair parts and/or repair service required on your Berkel grinder. Additional information may be obtained from:
Service Support Center
Berkel Company
4406 Technology Drive
South Bend, Indiana
8 • MB OWNER/OPERATOR MANUAL
