ASSEMBLY
To hire an authorized service technician to assemble the elliptical exerciser, call
Assembly requires two persons. Place all parts of the elliptical exerciser in a cleared area and remove the packing materials. Do not dispose of the packing materials until assembly is completed.
Assembly requires the included hex keys and your own Phillips screwdriver and rubber
mallet .
As you assemble the elliptical exerciser, use the drawings below to identify small parts. The number in parentheses below each drawing is the key number of the part, from the PART LIST on pages 24 and 25. The number follow- ing the parentheses is the quantity needed for assembly. Note: Some small parts may have been preassem- bled. If a part is not in the parts bag, check to see if it has been preassembled.
M6 Split Washer |
| M8 Split | M8.5 x 16mm x | M10 x 25mm | M10 Curved | Link Arm | |
| 1.5mm Washer | ||||||
Washer | Washer | Washer | Spacer | ||||
|
| M4 x 16mm | M6 x 35mm |
| M6 x 62mm | ||
Wave Washer | Screw | Screw |
| Screw | |||
|
|
|
|
|
|
| |
M8 x 15mm Button | M8 x 20mm Button | M8 x 25mm Button | M10 x 20mm Button | ||||
Screw | Screw | Screw |
| Screw | |||
|
|
| M10 x 93mm Button Screw |
|
|
1. While another person lifts the front of the | 1 |
|
| |
Frame (1), attach the Front Stabilizer (4) to the |
|
| ||
|
|
| ||
Frame with two M10 x 93mm Button Screws | 82 | 99 |
| |
(82) and two M10 Curved Washers (99). | 1 | |||
| ||||
|
|
| ||
| 99 |
|
| |
|
| 4 |
| |
| 5 |
|
|