ASSEMBLY
Assembly requires two people. Due to the size and weight of the home gym system, assemble it in the location where it will be used.
¥Place all parts of the home gym system in a cleared area and remove the packing materials; do not dispose of the packing materials until assembly is completed.
¥Before beginning, read each assembly step and look at each drawing carefully.
¥For help identifying small parts used in assembly, refer to the PART IDENTIFICATION CHART attached to the center of this manual.
¥During assembly, be sure that all parts are orient- ed as shown in the drawings.
¥Tighten all parts as you attach them, unless instructed to do otherwise.
THE FOLLOWING TOOLS (NOT INCLUDED) ARE REQUIRED FOR ASSEMBLY:
¥Two (2) adjustable wrenches 
¥One (1) phillips screwdriver 
¥One (1) rubber mallet 
¥Lubricant, such as grease or petroleum jelly, and soapy water are also required.
To simplify assembly, the following tools are recom- mended: A socket set, open or closed wrenches, or ratchet wrenches.
1. Before you begin, make sure that you have | 1 |
|
carefully read the instructions at the top of |
| |
|
| |
this page. |
| 88 |
Press a 2Ó Square Outer Cap (88) onto each end | 3 | |
|
| |
of the Stabilizer (71). Press a 2Ó Square Outer | 71 |
|
Cap onto each side of the Base (4). Press a 2Ó |
| |
88 |
| |
Square Inner Cap (27) into the end of the Base. |
| |
Insert two 5/16Ó x 2 1/2Ó Carriage Bolts (1) up | 1 | 4 |
through the Stabilizer (71). Insert two 5/16Ó x | 88 |
|
2 1/2Ó Carriage Bolts up through the Base (4). |
| 1 |
|
| |
Slide the indicated end of the Base (4) onto the |
| 27 |
|
| |
5/16Ó x 2 1/2Ó Carriage Bolts (1) in the Stabilizer |
|
|
(71). Tighten a 5/16Ó Nylon Locknut (3) onto each |
|
|
Carriage Bolt. | 2 | 72 |
|
| |
2. Set two Weight Bumpers (19) onto the Base (4) |
|
|
as shown. |
|
|
Slide the Weight Guides (72) into the Base (4). | 19 |
|
Attach each Weight Guide to the Base with a | 3 |
|
5/16Ó x 2 3/4Ó Bolt (11), two 5/16Ó Washers (8), |
| |
|
| |
two 1/2Ó x 1/2Ó Spacers (65), and a 5/16Ó Nylon | 8 | 65 |
Locknut (3). |
| |
|
| |
|
| 8 |
| 8 |
|
| 65 | 4 |
|
| |
|
| 11 |
4
