3.Slide six Weights (25) on the Weight Guides (72). Be sure that all of the Weights are turned so the pin grooves are on the indicated side.
4.Press the 1 1/4Ó Square Inner Cap (57) into the Front Upright (42).
Attach the 1Ó Plastic Stop (64) to the center hole in the Stop Bracket (63) with a 5/16Ó x 1 1/2Ó Bolt (24) and 5/16Ó Nylon Locknut (3).
Attach the Stop Bracket (63) to the Front Upright
(42)with a 5/16Ó x 2Ó Bolt (61), 5/16Ó Flat Washer (8), and 5/16Ó Nylon Locknut (3).
Slide the Front Upright (42) onto the two 5/16Ó x 2 1/2Ó Carriage Bolts (1) in the Base (4). Thread two 5/16Ó Nylon Locknuts (3) onto the Carriage Bolts. Do not tighten the Nylon Locknuts yet.
5
3 |
|
| 72 |
| 25 |
| Pin Grooves |
4 |
|
3 | 64 |
| 63 |
8 | 24 |
| |
| 57 |
| 61 |
| 42 |
| 3 |
| 1 |
4 |
|
