Weider WESY85070 user manual

19.Note: The 4 1/2Ó Pulley (81) shown in this step is pre-attached to the Adjustment ÒUÓ Bracket

Remove the 3/8Ó x 1 3/4Ó Bolt (48), 3/8Ó Nylon Locknut (21), and 4 1/2Ó Pulley (81) from the Adjustment ÒUÓ Bracket (75).

Attach the Adjustment ÒUÓ Bracket (75) to the Front Upright (42) with the 5/16Ó x 3 1/4Ó Bolt (35), a 5/16Ó Flat Washer (8), and a 5/16Ó Nylon Locknut (3).

Thread the Nylon Locknut onto the Bolt until the first two threads of the Bolt are through the Nylon Locknut.

Wrap the Long Cable (66) around the 4 1/2Ó Pulley

(81)as shown. Re-attach the Pulley to the Adjustment ÒUÓ Bracket (75) with the 3/8Ó x 1 3/4Ó Bolt (48) and 3/8Ó Nylon Locknut (21).

20.Note: The 3 1/2Ó Pulley (15) used in this step is pre-assembled. It is shown removed for easier part identification.

Route the Long Cable (66) around the 3 1/2Ó Pulley (15) on the right Arm (46). Tighten the 3/8Ó Nylon Jam Nut (5) and 3/8Ó x 1 3/4Ó Bolt (48). Be sure that the Cable Trap (59) is oriented as shown.

11

19
	48
3	8		35
	75	21	81
		42	66
20
66			48
5	15	59
		46