Kodak ESP 9 manual Using Quick Dial to select a Fax Phonebook entry

Models: ESP 9

1 141
Download 141 pages 3.04 Kb
Page 73
Image 73
Using Quick Dial to select a Fax Phonebook entry

 

Chapter 8

4 To use the last fax number used, press Start now. Otherwise, press

until the desired

recipient is selected, and then press OK.

 

The Fax phone number of the selected entry displays in the menu header, replacing any previous number. See the illustration below.

5Press Start to send the fax.

Using Quick Dial to select a Fax Phonebook entry

By assigning up to ten contacts in your Fax Phonebook with a number between 0 (zero) and 9, the Quick Dial feature in your ESP 9 All-in-One printer allows you to create shortcuts for quickly sending Faxes to them.

Note: To configure a fax recipient as a Quick Dial entry, review “Fax Phonebook entries” on page 67.

There are two ways to use the Quick Dial feature for sending faxes.

Specifying a Quick Dial recipient from the keypad

1Load the original. As appropriate review “Preparing a fax for transmission” on page 69.

2From the control panel, press Menu.

3 Press to select Send Fax and then press OK.

4Select the appropriate key on the control panel’s keypad associated with the Quick Dial entry, and then press Start. For example, press 8 to specify the entry assigned the Quick Dial value of “08.” See the illustration below.

Kodak ESP 9 Printer User Guide

65

Page 73
Image 73
Kodak ESP 9 manual Using Quick Dial to select a Fax Phonebook entry, Specifying a Quick Dial recipient from the keypad