Kodak ESP 9 manual Weak signal, Cannot connect to network, Corrective Action, Probable Cause

Models: ESP 9

1 141
Download 141 pages 3.04 Kb
Page 111
Image 111
Weak signal

Chapter 10

Corrective Action

Unplug the Ethernet cable.

Weak signal

Probable Cause

The access point is too far away or there is interference.

Corrective Action

If there is a long distance between your computer or access point and the printer, move them closer together.

If there are metal objects (such as a metal bookcase or refrigerator) in the transmission path, clear the path between the printer and the computer or access point.

If a cordless telephone, microwave, or other device that emits radio signals transmitting at 2.4 GHz is nearby, move it farther away to reduce radio interference. See Note on page page 105.

Cannot connect to network

Probable Cause 1

The equipment is not turned on.

Corrective Action

Turn on the networked devices, such as the access point for an infrastructure network, or the computer for an ad hoc network. For more information on how to turn on the access point, see the documentation that came with your access point.

Probable Cause 2

The All-in-One printer is not receiving a signal.

Corrective Action

Move the access point and the printer closer together. Then go through setup again.

Probable Cause 3

You have entered the SSID incorrectly.

Corrective Action

Enter the SSID correctly. Remember that the SSID is case-sensitive.

Probable Cause 4

You have entered the WEP key incorrectly.

Corrective Action

Enter the WEP key correctly. Remember that the WEP key is case-sensitive.

Kodak ESP 9 Printer User Guide

103

Page 111
Image 111
Kodak ESP 9 manual Weak signal, Cannot connect to network, Corrective Action, Probable Cause