
6.3.5.3Manage configurations
New in Moog Modular V 2.6: the possibility to maintain multiple configurations.
Default configuration
By default, Moog Modular V loads the configuration for Arturia Analog Experience keyboards.
Select one configuration
A configuration is loaded by clicking the corresponding entry in bottom part of “Learn menu”.
Create a new configuration
A new configuration can be created by clicking on the “Learn menu”, “New Config” entry. This will open a popup: enter the name you want to call your configuration and click on the “SAVE” button. A new entry for your configuration now exists in the list of available configurations.
You may now fill in this initially empty configuration by performing the assignment operations described in the previous section.
Copy a configuration
It is possible to copy a configuration by loading it and then clicking on “Save Config As”.
A popup opens: enter the name of your configuration. A new entry for your configuration now exists in the list of available configurations.
Remove a configuration
It is possible to remove a configuration by first loading it and then clicking on “Delete Current Config”.
6.3.5.4Minimum and maximum ranges
For each assignment, a minimum range value and a maximum range value can be set. This allows you to limit how much the controller will affect the parameter on Moog Modular V.
The assigned parameter will have the configured minimum value when the controller will be at its lowest position
The assigned parameter will only reach the configured maximum value when the controller will be at its highest position
You can invert (Negative Slope) the Min and Max so that parameter will have minimum value when control has the highest value, and parameter will have maximum value when control has the lowest value
ARTURIA – MOOG MODULAR V 2.6 – USER’S MANUAL | 59 |