Arturia 2.6 manual Sequence #2

Set the “Length” knob

￿To stop the sequencer click on the “OFF” button.

Sequence1

9.2.2Sequence #2

Now let’s see how to use the different combinations between knobs (by lines or columns to create 8, 16 or 24 step sequences). This will allow you to quickly have very different sequence lines available which although different will harmonize perfectly together. We will also look at the possibilities for the creation of ternary sequences (for example: 6, 12 or 18 steps).

To begin, reuse the previous sequence...

￿Click 4 times on the sequence display at the bottom of the first “Driver” oscillator (the display indicates “S4”). This will connect the latter to the fourth sequence output. This will allow us to create knob line or column combinations.

￿Select the “L1-2” function on the line selector on the right of the sequencer. Once you have created a melody on the second line, you will alternately hear the melodies played by these two lines.

122 ARTURIA – MOOG MODULAR V 2.6 – USER’S MANUAL