Arturia 2.6 manual Authorization, Registration

4AUTHORIZATION

Now your Moog Modular V 2.6 has been installed, you have to authorize the synthesizer.

Earlier versions used an “original CD + license number” protection scheme, however, the Moog Modular V 2.6 uses the Soft-eLicenser full-software solution. Avoiding the use of a USB port by default, this system allows using the synthesizer on one machine which must be connected to the Internet during the authorization process.

To transfer your license on another computer, or simply use your synthesizer on several computers (one instance at a time), you will need:

_to use one USB-eLicenser hardware dongle (sold separately, also used by many other software editors);

_in the eLicenser Control Center, to drag-and-drop your license from Soft-eLicenser to USB-eLicenser. This transfer, requiring a valid Internet connection, can be done both ways:

_from Soft-eLicenser to USB-eLicenser;

_from USB-eLicenser to Soft-eLicenser.

For any further technical detail, please check our website www.arturia.com/elicenser.

4.1REGISTRATION

The first step is to register your software in order to obtain the activation code that will enable you to actually use the software.

You should have handy the Serial Number of Moog Modular V and the Unlock Code (these are an integral part of the software and are printed on a small plastic card):

￿Connect your computer to the Internet, and go to this web page: http://www.arturia.com/login

￿If you don’t have any Arturia account yet, please create one now, this will bring you to this form:

20 ARTURIA – MOOG MODULAR V 2.6 – USER’S MANUAL