Modulation input connectors
To connect a modules output to the input of another module, click on the output and drag it to the target input while holding down the mouse button. When you are above the input, the connector lights up. In this case, you just need to release the mouse button to link a cable between the selected output and input.
Creating a new cable and finding an appropriate input, by click and drag
Another means is to right click (or [Shift]+click for Mac) on the input or output of a module. In this case, a menu appears with a list of possible connection points for this output/input. It can happen that the input/output is already connected to certain modules, and in this case, the already selected connection points appear in the menu. Simply select one of the connection points in the “Connect to” menu to create a connection. It is also possible to delete all of the connections by choosing the “Remove connections” option or delete one of the connections by clicking on it in the menu.
Input/output connection menu appears after a right click (or [Shift]+click)
The module inputs can only be connected to one output connector. On the other hand, each output connector can be connected to any number of input connectors, which allows, for example, the use of the same modulation signal to modify several synthesis settings.
62 | ARTURIA – MOOG MODULAR V 2.6 – USER’S MANUAL |
