Arturia 2.6 manual Second Section, Description

Models: 2.6

1 154
Download 154 pages 22.05 Kb
Page 88
Image 88

Scale

Sets the scale frequency

Amount of Shift

Sets the frequency transition

Mix

Mix between the positive and negative translations

Mixed output

Mix of negative and positive translations output connection jack

Positive output

Positive translation output jack

Negative output

Negative translation output jack

FM Input

Frequency modulation connection jack

Audio Input

Input signal connection jack

This module is used for a linear translation of the frequencies contained in the input signal. Because of this linearity, the initial harmonic relations are totally modified.

It is easy with this module, to produce metallic sounds.

There are three available outputs: two for each of the translations possible (negative and positive), the other for a mix of the two, the mix is set with the “Mix” button.

The translation rate, which is to say the difference in frequencies, is set with the “frequency” button. Following the selected scale (“scale” selector), the button will give a different gap. The scale also influences the amplitude and type of modulation.

In the exponential position, the translation goes from 2 Hz to 1024 Hz, the modulation being exponential. In the other positions (5,50,500,5k), the translation will be of a maximum of 5 Hz, 50 Hz, 500 Hz or 5000 Hz, in positive or negative.

7.2SECOND SECTION

7.2.1Description

The second section of the Moog Modular V regroups all of the effect modules and the sequencer. The outputs and inputs of this page needing connections with the modules of the first section are moved to the latter, in a small extension.

This section contains a module for equalization through a bank of resonant filters, a chorus module, a phaser, a stereo delay module, and a type 960 sequencer.

The 3 effect modules, filter bank, chorus and stereo delay are applied to the signal of the output amplifiers in function with the interrupters “VCA1” and “VCA2”. They are applied in the predefined order.

The choice between the chorus and the phaser is done through a menu displayed by clicking on the name of the module.

88

ARTURIA – MOOG MODULAR V 2.6 – USER’S MANUAL

Page 88
Image 88
Arturia 2.6 manual Second Section, Description