Arturia 2.6 manual Keyboard controllers

The pitch bend and modulation dials are also available for height (affected to the oscillator or filters) and modulation settings (affected to any of the synthesizers modulation sources). The connections are made by cables on the first screen.

5.5.2The keyboard controllers

The different settings concerning the real time controllers affected to the keyboard can be found on the left, above the virtual keyboard.

Here you will find all of the settings applied to the 4 key followers, the pitch bend and modulation wheels, as well as velocity and aftertouch.

￿Before using them, go back to the module section to define the parameters, which will be modulated by these controllers. The connection jacks are found underneath the modular synthesizer section.

The controller connection jacks

￿For this example, let’s take the “stereo_pad” sound created earlier. Connect the output of the modulation dial “mod” (at the bottom of this section) to the filter1 cut-off frequency modulation input. Set the amount parameter of this modulation to your liking so that it can be taken into account by the wheel. Now test by turning the dial on your MIDI keyboard or the virtual keyboard.

Connections for modulation and velocity outputs on the frequency modulation of filters 1 and 2

￿Now do the same thing, connecting the velocity output (“vel”) to the filter2 cut-off frequency modulation input. To test velocity settings, use your MIDI keyboard, the virtual keyboard naturally is not sensitive to velocity.

46 ARTURIA – MOOG MODULAR V 2.6 – USER’S MANUAL