The fourth output, for which the smooth can also be set with a “smooth” knob, is managed in the following manner. It takes the value of one of the 3 outputs in function with the current step and the type of progression specified by the “Mode output 4” selector.
When placed in the “none” position, the fourth output takes the output value selected by the “Forcing Line” button and its corresponding trigger input. It is therefore possible to have 3 different sequences, activated either manually by a click or dynamically by a trigger.
When the “Mode Output 4” selector is placed on the “L123” position, the fourth output will automatically cross outputs 1,2 and 3 each time the current step arrives on the eighth step. In this manner, it is possible to have a
When the “Mode Output 4” selector is placed on the “C123” position, the fourth output covers lines 123, but the change takes place at every sequencer clock impulse. We just need to wait for 3 impulses at every step, to alternatively have lines 1,2 and 3 of each of the steps. The functioning is the same on positions “C321”, “C12”, “C13” and “C23”.
On the “Rand” position, the choice of fourth output is random.
7.3THIRD SECTION
A small section has been added bellow the connection section. It regroups all of the external
The output jacks “External audio” are used to treat the external signals and use the Moog Modular V as an effect.
The “Out” jacks correspond to the two left and right output jacks on the Moog Modular V. It is thus possible to loop it to itself and obtain special effects.
Internal connections
7.4FOURTH SECTION
The fourth section contains a virtual keyboard, control for the 4 key follows, 2 modulation surfaces, and a few shortcuts to the most frequently used settings (Envelope for the 2 output VCA and
It is also in this mode that we find the volume control and general tuning.
96 | ARTURIA – MOOG MODULAR V 2.6 – USER’S MANUAL |
