There are 16 independent amplifiers. Each has its own volume setting with the rotating “level” button and its amplitude modulation input.
These amplifiers can be regrouped to form mixers. To group 2 amplifiers, just click on the “Link” button separating them.
When 2 amplifiers form a group, the output signal of the first corresponds to the sum of their collective outputs, whereas the output of the second remains identical to the signal before grouping.
To restore their independence, just click on the “Link” button.
It is possible to add as many amplifiers as necessary. In this case it is still the output of the first amplifier, which will have the signal corresponding to the sum of all of the amplifiers of the group, the others retaining their independence.
Thanks to this method, with 16 amplifiers to begin with, it is possible to create a large range of mixing while keeping a few amplifiers available for modulation.
We can, for example, form a group of the first six amplifiers to mix the first six oscillators, then a group with the next 3 to mix the 3 last oscillators, and finally a group with the next 2 to mix the outputs of 2 filters which will respectively treat the output of the first amplifier and the output of the seventh. There are 5 remaining amplifiers for modulation or other mixes.
Each amplifier possesses a current limiting function allowing a soft clipping. This function is activated with the “clip” button. The “inv” button lets you invert the signal, as input to the corresponding amplifier..
The four right VCA are modulated with a linear function, on the contrary, the other are modulated with a exponential function.
7.1.8Trigger delay
Time1
Trigg 1 Input
Mode
|
|
| Time2 |
|
| ||
| Trigg2 Input |
|
|
|
| Trigger delay | |
Time 1 | Sets the time for the first delay | ||
Trigg 1 Input | Choice of trigger input for the first delay | ||
Mode | Choice of mode (independent, parallel, series) | ||
Time 2 | Sets the time for the second delay | ||
Trigg 2 Input | Choice of trigger input for the second delay | ||
ARTURIA – MOOG MODULAR V 2.6 – USER’S MANUAL | 81 |
