Pioneer AVH-P4050DVD operation manual Setting the menu language, Setting the angle icon display

Models: AVH-P4050DVD

1 96
Download 96 pages 38.64 Kb
Page 39
Image 39
Setting the menu language

 

Section

Operating this unit

03

 

 

Setting the angle icon display Notes

!If the selected language is not recorded on the disc, the language specified on the disc is outputted.

!You can also switch the audio language by touching AUDIO during playback. (Refer to Changing audio language during playback (Multi-audio) on page 25.)

!Even if you use AUDIO during playback to switch the audio language, this does not af- fect the settings here.

Setting the menu language

You can set the preferred language for dis- plays of menus recorded on a disc.

%Touch ASSIST SUBTITLE on the DVD

setup menu to turn assist subtitles on.

# To turn the assist subtitle off, touch ASSIST SUBTITLE again.

Setting the angle icon display

You can set it up so that the angle icon ap- pears on scenes where the angle can be switched.

!Initially, this function is set to on.

%Touch MULTI ANGLE on the DVD setup

menu to turn angle icon display on.

# To turn the angle icon display off, touch MULTI ANGLE again.

Operating this unit

1Touch MENU LANGUAGE on the DVD setup menu.

A menu language menu is displayed.

2Touch the desired language.

The menu language is set.

#To switch to the second language select menu, touch NEXT.

#To return to the first language select menu, touch PREV.

#If you have selected OTHERS, refer to When you select OTHERS on the previous page.

Switching the assist subtitle on or off Note

If the selected language is not recorded on the disc, the language specified on the disc is dis- played.

Switching the assist subtitle on or off

If assist subtitles are recorded on a DVD disc, you can display them by turning the assist subtitle function on.

You can turn assist subtitles on or off as de- sired.

Setting the aspect ratio

There are two kinds of display. A wide screen display has a width-to-height ratio (TV aspect) of 16:9, while a regular display has a TV aspect of 4:3. Be sure to select the correct TV aspect for the display connected to REAR MONITOR OUTPUT.

!When using a regular display, select either LETTER BOX or PAN SCAN. Selecting

16 : 9 may result in an unnatural picture.

!If you select the TV aspect, the unit’s dis- play changes to the same setting.

%Touch TV ASPECT on the DVD setup menu to select the TV aspect.

Touch TV ASPECT repeatedly until the desired TV aspect appears in the display.

!16 : 9 – Wide screen picture (16:9) is dis- played as it is (initial setting)

!LETTER BOX – The picture is the shape of a letterbox with black bands at the top and bottom of the screen

!PAN SCAN – The picture is cut short at the right and left of the screen

En Setting the aspect ratio39Manual background

Page 39
Image 39
Pioneer AVH-P4050DVD Setting the menu language, Setting the angle icon display, Switching the assist subtitle on or off