Pioneer AVH-P4050DVD Setting the clock, Setting for rear view camera back up camera

	Section
Operating this unit	03

Setting the clock

Use these instructions to set the clock.

1Touch CLOCK ADJ on the system menu.

2Touch ON/OFF to turn the clock display

on.

# To turn the clock display off, touch ON/OFF again.

3Touch c or d to select the segment of the clock display you wish to set.

Each time you touch cor d it will select one segment of the clock display:

Hour—Minute

As you select segments of the clock display the segment selected will be highlighted.

4Touch a or b to put a clock right.

Notes

!You can match the clock to a time signal by touching JUST.

—If 00 to 29, the minutes are rounded down. (e.g., 10:18 becomes 10:00.)

—If 30 to 59, the minutes are rounded up. (e.g., 10:36 becomes 11:00.)

!Even when the sources are off, the clock dis- play appears on the display.

Setting for rear view camera (back up camera)

CAUTION

Pioneer recommends the use of a camera which outputs mirror reversed images, other- wise screen image may appear reversed.

This unit features a function that automatically switches to the rear view camera video (REAR CAMERA IN jack) when a rear view camera is installed on your vehicle. When the gear shift is in REVERSE (R) position, the video auto- matically switches to a rear view camera video. (For more details, consult your dealer.)

!After you set up the rear view camera set- ting, move the gear shift in REVERSE (R)

and confirm if a rear view camera video can be shown on the display.

!If the display should be switched to a rear view camera video by error while you are driving forward, change the rear view cam- era setting.

!To end watching a rear view camera video and return to the source display, press and hold VOLUME/MUTE.

!Even while driving, rear view camera image can be displayed. To do this, touch REARVIEW source icon. In this case, touch REARVIEW again to turn off the rear view camera. For details, refer to Selecting a source on page 17.

%Touch CAMERA POLARITY on the sys- tem menu to select an appropriate setting.

!BATTERY – When the polarity of the con- nected lead is positive while the gear shift is in REVERSE (R) position

!GROUND – When the polarity of the con- nected lead is negative while the gear shift is in REVERSE (R) position

!OFF – When a rear view camera is not con- nected to this unit

Switching the iPod charge setting

You can turn the iPod charge setting on or off while listening to an iPod.

!Listening AM radio while an iPod is charged from this unit may generate noise. In this case, turn the iPod charge setting off and noise is disappeared.

!Initially, this function is set to on.

1Touch NEXT on the system menu.

2Touch iPod CHARGE to turn the iPod

charge setting on.

# To turn the iPod charge setting off, touch iPod CHARGE again.

Note

For maximum performance, we recommend that you use the latest version of the iPod software.

Operating this unit

En 47