TANDBERG 3G Gateway User Manual
5.6 Video Portal Configuration
Video Portal Settings
Video Portal ModeWhen set to “Off” the 3G gateway will operate standalone. However, if it needs to be configured in tandem operation with a Video Portal the mode has to be set to “On”.
Note that setting the Video Portal Mode “On” all H323, SIP related tabs as well as the Service Configuration tab will disappear from the window (See figure below).
Video Portal Systems
Primary system address Enter the IP Address of the Video Portal the 3G Gateway should register to.
Backup system address Enter the IP Address of the backup Video Portal the 3G Gateway should register to.
Save
When ready to store the new settings, press ‘Save’. These settings will take effect when the system has been restarted.
Restart
This button will restart the 3G Gateway. Any changes made with respect to the Video Portal settings of the 3G Gateway will take effect after the system has been restarted.
42
