TANDBERG 3G Gateway User Manual

4 View System Status

To view current gateway status, open ‘System Status’ as shown in the figure below.

4.1.1 ISDN PRI/BRI Status

PRI Status

The colored part of the system status indicates the condition of the ISDN PRI line. There are three possible conditions:

Sync 30 of 30. ISDN layer 1 and 2 are up and in sync.

Sync 0 of 0, ISDN layer 1 and 2 are in sync but not up.

Red Alarm, 0 of 0, ISDN layer 1 and 2 are down, mostly indicating a disconnected ISDN line.

Besides the indications on the webpage the ISDN interface also contains 4 LEDs, located at the back-side of the 3G Gateway.

24

Page 24
Image 24
TANDBERG Hub user manual View System Status, Isdn PRI/BRI Status, PRI Status