TANDBERG Hub Idle No active call, call has been disconnected, Duration, Status, IP/H.323, Usage

TANDBERG 3G Gateway User Manual

Source shows the Status of the incoming call to the 3G Gateway, the number and which network the incoming call is using.

Destination shows the Status of the outgoing call from the 3G Gateway, the number and which network the outgoing call is using.

Idle No active call, call has been disconnected.

Alerting Call is being connected, i.e. ringing state.

Connected Call is connected.

Number ISDN or IP number.

IP/H.323 Call connected is using the H.323 protocol over IP.

Duration

Shows the length of the current call.

Status

Shows current status of the PRI and IP status.

PRI:

PRI line is synced and active. Click on More... to see status in detail.

PRI line is not active. Click on More... to see status in detail.

IP/H.323:

The gateway is registered with a Gatekeeper. Click on More... to see status in detail.

The gateway is not registered with a Gatekeeper. Click on More... to see status in detail.

Usage

The usage bar shows the current status of all the available resources (CPU, ISDN channels and number of calls)

When the Resource Usage reaches the “Busy on Load”-limit, the gatekeeper will try to route outgoing IP calls to other gateways. This is done to maintain availability for incoming UMTS calls when using multiple gateways.

Resource Usage 90%. Click on the Usage link to see resource usage in detail.

H.323 Busy on Load> 70%. Click on the Load link to adjust the value.

19