Pioneer AVH-P4050DVD Using the AUX source, About AUX connection method, Mini pin plug cable AUX

	Section
Operating this unit	03

4Press EQ to complete the 4-point ad- justment.

The adjusted position data is saved.

# Do not turn off the engine while saving the ad- justed position data.

5Press EQ to proceed to the 16-point ad- justment.

The 16-point touch panel adjustment screen

appears.

# To cancel the adjustment, press and hold

VOLUME/MUTE.

6Gently touch the center of the + mark displayed on the screen with the touch panel adjustment pen.

After you touch all the marks, the adjusted po-

sition data is saved.

# Do not turn off the engine while saving the ad- justed position data.

7Press and hold VOLUME/MUTE to com- plete the adjustment.

Using the AUX source

A separately sold auxiliary device such as VCR or portable device can be connected to this unit. When connected, auxiliary device is auto- matically recognized as AUX source and as- signed to AUX.

About AUX connection method

You have two methods to connect auxiliary de- vice to this unit.

Mini pin plug cable (AUX 1)

When connecting auxiliary device using a mini plug cable

Insert the stereo mini plug into the AUX input jack on this unit.

!If an iPod with video capabilities is con- nected to this unit via 3.5 mm plug (4 pole) cable (e.g., CD-V150M), you can enjoy the video contents of the iPod.

!It is possible to connect a portable audio/ video player by using a 3.5 mm plug (4 pole) to RCA cable, which is sold sepa- rately. However, depending on the cable, re- verse connection between Red (right side audio) cable and yellow (video) cable is re- quired. Otherwise, audio and video may not be correctly reproduced.

%Insert the mini plug into the AUX input jack on this unit.

For more details, refer to What’s What on page 13.

IP-BUS-RCA interconnector (AUX 2)

When connecting auxiliary device using an IP- BUS-RCA Interconnector (sold separately)

%Use an IP-BUS-RCA Interconnector such as the CD-RB20/CD-RB10 (sold separetely) to connect this unit to auxiliary device fea- turing RCA output.

For more details, refer to the IP-BUS-RCA Inter-

connector owner’s manual.

# You can only make this type of connection if the auxiliary device has RCA outputs.

Selecting AUX as the source

%Touch the source icon and then touch

AUX 1/AUX 2 to select AUX as the source.

# If the auxiliary setting is not turned on, AUX cannot be selected. For more details, see Switch- ing the auxiliary setting on page 42.

Setting the AUX title

The title displayed for the AUX source can be changed.

!Each title can be up to 10 characters long.

1After you have selected AUX as the source, touch AV MENU and FUNCTION MENU and then touch

NAME EDIT.

# When the touch panel keys are not displayed, you can display them by touching the screen.

Operating this unit

En 49