Disc Storage & Management, Handling Cautions

12. Use only with the cart, stand, tripod, bracket, or table specified by

the manufacturer, or sold with the

apparatus. When a cart is used, use

caution when moving the cart/apparatus combination to avoid injury from tip-over.

13. Unplug this apparatus during lightning storms or when unused for long periods of time.

14. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as when the power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.

Disc Storage & Management

•Holding Discs

-- Fingerprints or scratches on a disc may reduce sound and picture quality or cause skipping

-- Avoid touching the surface of a disc where data has been recorded.

-- Hold the disc by the edges so that fingerprints will not get on the surface.

-- Do not stick paper or tape on the disc.

•Cleaning Discs

-- If you get fingerprints or dirt on a disc, clean it with a mild detergent diluted in water and wipe with a soft cloth.

-- When cleaning, wipe gently

from the inside to the outside of the disc.

• Disc Storage

`` Do not keep in direct sunlight. `` Keep in a cool ventilated area.

`` Keep in a clean protection jacket and store vertically.

Handling Cautions

•Do not expose this apparatus to dripping or splashing. Do not put objects filled with liquids, such as vases on the apparatus.

•To turn this apparatus off completely, you must pull the power plug out of the wall socket. Consequently, the power plug must be easily and readily accessible at all times.

•Do not plug multiple electric devices into the same wall socket. Overloading a socket can cause it to overheat, resulting in a fire.

•Maintenance of Cabinet.

-- Before connecting other components to this player, be sure to turn them off.

-- If you move your player suddenly from a cold place to a warm place, condensation may occur on the operating parts and lens and cause abnormal disc playback. If this occurs, unplug the player, wait for two hours, and then connect the plug to the power outlet. Then, insert the disc, and try to play back again.

•If the product makes an abnormal noise or produces a burning smell or smoke, turn off the power switch immediately and disconnect the power plug from the wall outlet. Then, contact the nearest customer service centre for technical assistance. Do not use the product. Using the product as it is may cause a fire or an electric shock.

Using the 3D function

IMPORTANT HEALTH AND SAFETY INFORMATION FOR 3D PICTURES. Read and understand the following safety information before using the 3D function.

•Some viewers may experience discomfort while viewing 3D TV such as dizziness, nausea, and headaches.

If you experience any such symptom, stop viewing 3D TV, remove the 3D Active Glasses, and rest.

•Watching 3D images for an extended period of time may cause eye strain. If you feel eye strain, stop viewing 3D TV, remove your 3D Active Glasses, and rest.

•A responsible adult should frequently check on children who are using the 3D function. If there are any reports of tired eyes, headaches, dizziness, or nausea, have the child stop viewing 3D TV and rest.

•Do not use the 3D Active Glasses for other purposes (Such as general eyeglasses, sunglasses, protective goggles, etc.)

•Do not use the 3D function or 3D Active Glasses while walking or moving around. Using the 3D function or 3D Active Glasses while moving around may cause you to bump into objects, trip, and/or fall, and cause serious injury.

•If you want to enjoy 3D content, connect a 3D device (3D compliant AV receiver or TV) to the player's HDMI OUT port using a high-speed HDMI cable. Put on 3D glasses before playing the 3D content.

•The player outputs 3D signals only through HDMI cable connected to the HDMI OUT port.

•As the video resolution in 3D play mode is fixed according to the resolution of the original 3D video, you can not change the resolution to your preference.

•Some functions such as BD Wise, screen size adjustment, and resolution adjustment may not operate properly in 3D play mode.

•You must use a high-speed HDMI cable for proper output of the 3D signal.

•Stay at least three times the width of the screen from the TV when watching 3D images. For example, if you have a 46-inch screen, stay 138 inches (11.5 feet) from the screen.

•Place the 3D video screen at eye level for the best 3D picture.

•When the player is connected to some 3D devices, the 3D effect may not function properly.

•This player does not convert 2D content into 3D.

•"Blu-ray 3D" and "Blu-ray 3D" logo are trademarks of the Blu-ray Disc Association

Samsung BD-F5500/SQ manual Disc Storage & Management, Handling Cautions, Using the 3D function

Models: BD-F5500/SQ