Pioneer AVH-P4050DVD operation manual Selecting the OSD color, Selecting the illumination color

Models: AVH-P4050DVD

1 96
Download 96 pages 38.64 Kb
Page 48
Image 48
Selecting the OSD color

Section

03Selecting the illumination colorOperating this unit

Selecting the OSD color

You can change the OSD color.

%Touch OSD COLOR to select the desired color.

Each time you touch OSD COLOR it selects colors in the following order:

BLUE (blue)—RED (red)—AMBER (amber)— GREEN (green)—VIOLET (violet)

Selecting the illumination color

This unit is equipped with multiple-color illu- mination. You can select a desired color from 112 different types of color.

Direct selection from preset illumination color

You can select an illumination color from the color list.

1Touch ILLUMI COLOR to display the set- ting menu.

2Touch one of the color list.

You can select one from the following list.

!BLUE (blue)

!RED (red)

!AMBER (amber)

!GREEN (green)

!VIOLET (violet)

!SCAN (scanning all colors)

Direct selection from preset illumination color Note

SCAN setting cycles continuously through all the

4To store the customized color in mem- ory, touch and hold one of preset keys

(Customizing the illumination color) 1 to 3 until the beep sounds.

The customized color has been stored in mem- ory.

The next time you touch the same preset key, the color is recalled from memory.

Adjusting the response positions of the touch panels (Touch Panel Calibration)

If you feel that the touch panel keys on the screen deviate from the actual positions that respond to your touch, adjust the response po- sitions of the touch panel. There are two ad- justment methods: 4-point adjustment, in which you touch four corners of the screen; and 16-point adjustment, in which you make fine-adjustments on the entire screen.

!Make sure to use the supplied pen for ad- justment, and gently touch the screen. If you press the touch panel forcefully, the touch panel may be damaged. Do not use a sharp pointed tool such as ballpoint pen or a mechanical pen. Otherwise the screen is damaged.

!If touch panel adjustment cannot be per- formed properly, consult your local Pioneer dealer.

1Touch the source icon and then touch

OFF to turn this unit off.

# When the source icon is not displayed, you can display it by touching the screen.

colors.

Customizing the illumination color

1Touch ILLUMI COLOR to display the set- ting menu.

2Touch Manual background to display the customizing menu.

2 Press and hold h (eject).

The 4-point touch panel adjustment screen ap- pears.

3Touch each of the arrows on the four corners of the screen with the touch panel

adjustment pen.

# To cancel the adjustment, press and hold

VOLUME/MUTE.

3Rotate VOLUME/MUTE to customize the color.

Manual background48Manual background En

Page 48
Image 48
Pioneer AVH-P4050DVD Selecting the OSD color, Selecting the illumination color, Customizing the illumination color