Pioneer AVH-P4050DVD Boosting the bass, Using the high pass filter, Adjusting source levels

	Section
Operating this unit	03

3Touch c or d next to PHASE to select the phase of subwoofer output.

Touch d to select normal phase and NORMAL appears in the display. Touch c to select reverse phase and REVERSE appears in the display.

4Touch c or d next to LEVEL to adjust the output level of the subwoofer.

+6 to –24 is displayed as the level is increased or decreased.

5Touch c or d next to FREQUENCY to se- lect cut-off frequency.

Each time you touch cor d selects cut-off fre- quencies in the following order: 50Hz—63Hz—80Hz—100Hz—125Hz

Only frequencies lower than those in the se- lected range are outputted from the subwoo- fer.

Boosting the bass

Bass boost function boosts the bass level of sound.

1Touch BASS BOOSTER on the audio function menu.

2Touch c or d to select a desired level.

0to +6 is displayed as the level is increased or decreased.

Using the high pass filter

When you do not want low sounds from the subwoofer output frequency range to play from the front or rear speakers, turn on the HPF (high pass filter). Only frequencies higher than those in the selected range are output from the front or rear speakers.

1Touch HPF on the audio function menu.

2Touch d next to HPF to turn high pass

filter on.

# To turn high pass filter off, touch c.

3Touch c or d next to FREQUENCY to se- lect cut-off frequency.

Each time you touch cor d selects cut-off fre- quencies in the following order: 50Hz—63Hz—80Hz—100Hz—125Hz

Only frequencies higher than those in the se- lected range are outputted from the front or rear speakers.

Adjusting source levels

SLA (source level adjustment) lets you adjust the volume level of each source to prevent ra- dical changes in volume when switching be- tween sources.

!Settings are based on the FM volume level, which remains unchanged.

1Compare the FM volume level with the level of the source you wish to adjust.

2Touch NEXT on the audio function menu.

3Touch SLA.

4Touch c or d to adjust the source vo- lume.

Each time you touch cor d it increases or de- creases the source volume.

+4 to –4 is displayed as the source volume is increased or decreased.

Notes

!The AM volume level can also be adjusted with source level adjustments.

!Video CD, CD, compressed audio and DivX are set to the same source level adjustment volume automatically.

!External unit 1 and external unit 2 are set to

the same source level adjustment volume automatically.

Operating this unit

En 37