Topfield TF 6000 PVRt 4.2 Resetting to factory settings

4.2Resetting to factory settings 27

Youshould set the Search Mode option to Auto at the ﬁrst ser-

vicesearch after connecting the digital receiver. The digital re-

ceiver will searchall available services with automatic search

mode. Transponder numbers range from 6 to 12 at VHF and

28to 69 at UHF.

Tosearch a certain transponder, set the Search Mode option

toManual, and select your desired transponder at the Channel

option.

Youcan search pay services as well as free services. To search

only freeservices. set the FTA/Scrambledoption to FTA only.

FTAmeans free service. Tosearch only pay services, set it to

CASonly. CASmeanspay service. Tosearch both free services

andpay services, set it to FTA + CAS.

Tostart service search, select the Service Search command.

Thenappears a list box, in which found services will be listed.

Press the ¤

OK button to save found services when a service

searchhas been completed. Tostop service searchon the way

orexit without saving, press the ¤

EXIT button.

4.2 Resetting to factory settings

Thedigital receiver maintains the following data:

•Servicelist

•Favoritelist

•Timerevents

•Preferencesettings

Youcan reset all data of the digital receiver. To reset all the

data, select the Installation >Factory Setting menu. Then a

conﬁrmationbox appears. Withthe Yes reply,service entries,

favoriteentries and timer events will be all deleted, and pref-

erenceoptions will be reset to the manufacturer ’s factory set-

tings.